Hot Stamping Machine Portable Leather Cooling Knife Mold Logo Trademark Must Buy | Дом и сад

Hot Stamping Machine Portable Leather Cooling Knife Mold Logo Trademark Must Buy | Дом и сад

Notice：

Because the plug used in each country and region will be different.
So please note which plug is used when placing the order.

Product parameters

Add -2 after the attribute value to adjust the temperature, and the rest to the non-adjustable temperature

If you have special requirements for wire plugs, please be sure to contact customer service!!!Otherwise, the plug we sent is not the same as your local plug, please know!!!

Information/Commodity Information:
Product Name: Portable (Hand-held) Stamping Machine/Stamping Machine.
Branding area: ≤ 7*7cm.
Hot area: 4 x 4cm to master.
Temperature range: 0-400 ℃, adjustable constant temperature
Voltage power: 110V / 220V & nbsp; 300W
Size: Approx. 20cm x 4cm x 4cm Weight: approx. 0.5kg
Product function: suitable for leather, leather bag, business card, paper, plastic, wood, insole, bamboo shoot, tea packaging, bronzing / branding, etc.
Product features: small and convenient, direct plug-in use, adjustable temperature, replaceable mold, casual lying you need content.

Note: This machine is a hand-held one. Only when the balance is well controlled can better effect be achieved. Please choose a desktop machine for professional stamping.

Methods / Usage:
1: Install the mold into the mold hole in the center of the heating plate.
2: Plug in the power cord.
3: Press the power "switch".
4: Press the "SET" key once, the set temperature SV will flash.
5: Press the "Shift" key to move to the number of digits to be set, and press the "Increase" or "Decrease" key to increase or decrease the value.
6: Wait for the temperature to rise to the set temperature. The temperature is dynamically balanced. It is normal for the temperature to be higher or lower than the set temperature.
7: Press the machine on the leather or wooden board.