Монитор HDMI LCD 13,3 дюйма Raspberry Pi 3 Model B+/B с кейсом, разрешением 1920x1080 и сенсорным IPS дисплеем для RPI3 B B+ BB Black.

Монитор HDMI LCD 13 3 дюйма Raspberry Pi Model B+/B с кейсом разрешением 1920x1080 и сенсорным IPS дисплеем для RPI3 B B+ BB Black.

13.3inch HDMI LCD (H) (with case) Monitor IPS 1920x1080 Capacitive Touch Screen Toughened Glass Cover For Raspberry Pi 3 B/B+ BB Black

Overview:

This is a HDMI LCD H type with case, 13.3 inch, 1920x1080 resolution,  IPS display,capacitive Touch Screen LCD with Toughened Glass Cover, Supports Multi mini-PCs, Multi Systems..

Features:

13.3inch IPS screen,1920x1080 hardware resolution

Toughened glass capacitive touch panel, 6H hardness

Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers

When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free

When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free

Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch

Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.

3.5mm audio jack, supports HDMI audio output

Embedded ferrite Hi-Fi speaker

Also supports VGA input (specific cable is required and should be purchased separately)

75x75mm spacing mounting holes (M4 screw hole) for general wall mount

Comes with 75° tilt angle stand

Using with Game Consoles:

Note:

Limited by the game console OS, the touch function is unavailable.

Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack.

External Demension:

Development Resources:

Wiki : www.waveshare.com/wiki/13.3inch_HDMI_LCD_(H)_(with_case) 

FAQ:

Why the LCD doesn't work with my Raspbian?

To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.

However, for the first testing, you may want to use our provided image directly.

Why the LCD still doesn't work with the Waveshare provided image?

Make sure the hardware connection is correct and connects fine.

Make sure the image in TF card is burnt correctly.

The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.

Which power supply should I use?

It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.

For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.

Packing List:   

13.3inch HDMI LCD (H) (with case) x1

Power adapter 12V x1

Power adapter EU head x1

HDMI cable x1

USB type A plug to micro B plug cable x1

Quick start sheet x1